Angle closing machine WV-HM

The angle closing machine is a three flaps closer to fold the lid of filled cartons and to close the front and end flaps by hot melt system.

• stable and strong basic construction
• high efficiency and availability
• operator friendly

• dimensions closing machine approx. l 4.200 mm x w 2.600 mm x h 2.380 mm
  
• stainless steel 1.4301 execution
  
• inlet and synchronization by round belts
  
• carton transport by adjustable lug chains
  
• fast and accurate size changeover by spindles. Size range :
     min.  l 100 mm x w  80 mm x h 20
     max. l 360 mm x w 200 mm x h 80 mm
  
• outlet machine to the left or to the right
  
• hot melt spraying system Robatech
  
• roller press station
  
• Stöber gear motor 2,2 kW
  
• safety stainless steel 1.4301 and macrolon covering
  
• stainless steel switch cabinet, PLC Siemens Simatic S7, frequency converter
  
• operating panel TP

Capacity	up to approx. 100 cartons/min., depending on format
Connection	3 x 400 V,  50 Hz, PE + N 2,5 kW (closer) + 3 kW (hot melt system) air 6 bar dry and oil-free
Weight	up to approx. 1.500 kg, depending on format

If capacities up to approx. 200 cartons/min. are requested, we advice to choose for our straight on closing machine GV-HM.

Other executions on enquiry. Technical modification reserved.

The filled cartons reach the closing machine. Belts synchronize the carton to the lug chains. As soon as a pack is positioned and the machine is in synchronized phase the stop station opens. The distance between the cartons is adapted by accelerating belts. After this the packs are delivered to horizontal lug chains. The lid of the carton and the rear flaps are folded. In the main lug chain section a glue trace is applied on to the front flap inside. The front flap is folded and pressed to the front of the carton by a roller station. The carton reaches the second closing section of the machine by a top lug chain. Here the end flaps are glued, folded and pressed to the sides of the pack.
A central size changeover system guarantees short format changeover times (ca. 10 - 20 min./ 1 person).